Showing 1–36 of 127 results

100 x 3W LED Flood/Spot Beam Work Light Bar – 12V/24V

£205.61 inc VAT - £171.34 exc VAT
  • Powerful 100 x 3 watt 12/24V LED flood/Spot light bar
  • 20,000 Lumens
  • 6000K Colour temperature
  • Protected to IP69K
  • Robust black die cast aluminium housing with polycarbonate lens
  • H 111.2 x W 1380 x D 86.5mm
  • Approx. life:30,000 hours
  • EMC approved
  • 1080p AHD CCTV Colour Forward Facing Camera – 12V

    £148.67 inc VAT - £123.89 exc VAT
    Durite 1080p AHD forward facing camera offers a Full High Definition (FHD) picture and video quality. It uses the latest technology that can capture crystal clear footage even in low light condition.
  • 1/2.9" 2 Megapixel CMOS image sensor
  • 150° Wide viewing angle
  • Built-in microphone
  • Supplied with 4 PIN Aviation connetcion
  • E-Marked R10 EMC approved
  • 12/24V Alternator Pick-up Tachometer with Hour Meter – 0-4000RPM

    £145.27 inc VAT - £121.06 exc VAT
    12/24V Alternator Pick-up Tachometer with Hour Meter - 0-4000RPM

    12/24V Battery Tester With Start Charge Analyzer

    £186.61 inc VAT - £155.51 exc VAT
    Built in 37mm thermal printer, microprocessor controlled, for use on lead-acid automotive batteries including: Wet Cell, Lead/Calcium, Sealed, Deep cycle, AGM, GEL and Maintenance Free.

    12/24V Dual Battery Voltage Monitor

    £164.39 inc VAT - £136.99 exc VAT
    12/24V Dual Battery Voltage Monitor

    120W Driving Work lamp Bar with Position and Amber Warning – 12/24V

    £201.71 inc VAT - £168.09 exc VAT
    Durite work light driving lamp with amber warning LED’s and position lamp. Supplied with 600mm Fly Lead with 6 PIN DT connector.
  • 120W Power
  • 10,080 Lumens
  • Protected to IP68/IP69K
  • 5700K colour LEDs
  • W 375 x D 70 x H 67mm
  • CE, E-Marked, EMC R10, R7, R112 & ECE R65 approved
  • 120W LED Driving Work Lamp Bar – 12/24V

    £171.87 inc VAT - £143.23 exc VAT
    120W LED Driving Work Lamp Bar - 12/24V

    12V BULB DISPENSER (118pcs)

    £165.13 inc VAT - £137.61 exc VAT
    This stand includes 118 pieces; 207 x 5, 233 x 5, 239 x 5, 245 x 5, 265 x 5, 380 x 5, 380W x 5, 382 x 5, 382W x 5, 382WA x 5, 433C x 5, 433D x 5, 488 x 2, 475 x 5, 499 x 5, 501 x 5, 501A x 5, 504 x 5, 566 x 5, 567 x 5, 581 x 5, 584 x 5, 921B x 5, 9005 x 2, 9006 x 2, H11 x 2

    12V Wiper Motor – 2 Speed Autopark 50mm Twin Shaft 60-70-80°

    £173.71 inc VAT - £144.76 exc VAT
    12V Wiper Motor - 2 Speed Autopark 50mm Twin Shaft 60-70-80°

    12V Wiper Motor – 2 Speed Autopark 80mm Twin Shaft 60-70-80°

    £173.71 inc VAT - £144.76 exc VAT
    12V Wiper Motor - 2 Speed Autopark 80mm Twin Shaft 60-70-80°

    12V Wiper Motor – Autopark 48mm Twin Shaft 110°

    £146.75 inc VAT - £122.29 exc VAT
    12V Wiper Motor - Autopark 48mm Twin Shaft 110°

    12V Wiper Motor – Autopark 48mm Twin Shaft 90°

    £146.75 inc VAT - £122.29 exc VAT
    12V Wiper Motor - Autopark 48mm Twin Shaft 90°

    2 Way Female Deutsch DT Series Connector Housing only (shell) Pk 100

    £159.90 inc VAT - £133.25 exc VAT
    2 Way Female Deutsch DT Series Connector is rated at 13 Amps continuous. Order Part No. 0-011-42 for 1 full kit, supplied with terminals for cables 0.5-1.0mm² and seals. Order Part No. 3-011-42 for 100 x housing only (shell). Order Part No. 3-111-42 for 100 x wedgelock only (wedge). Terminals for 1.0-2.0mm² cables also available.

    24V BULB DISPENSER (118pcs)

    £151.85 inc VAT - £126.54 exc VAT
    This stand includes 118 Pieces; 149 x 10, 150 x 10, 241 x 10, 242 x 5 , 246 x 10, 249 x 10, 334 x 10, 346 x 10, 433E x 5, 466 x 4, 475 x 6, 499A x 6, 507 x 5, 566A x 5, 581A x 10, H11A x 2

    24V Wiper Motor – 2 Speed Autopark 50mm Twin Shaft 60-70-80°

    £185.39 inc VAT - £154.49 exc VAT
    24V Wiper Motor - 2 Speed Autopark 50mm Twin Shaft 60-70-80°

    24V Wiper Motor – 2 Speed Autopark 80mm Twin Shaft 60-70-80°

    £185.39 inc VAT - £154.49 exc VAT
    24V Wiper Motor - 2 Speed Autopark 80mm Twin Shaft 60-70-80°

    24V Wiper Motor – Autopark 48mm Twin Shaft 110°

    £150.38 inc VAT - £125.32 exc VAT
    24V Wiper Motor - Autopark 48mm Twin Shaft 110°

    24V Wiper Motor – Autopark 48mm Twin Shaft 90°

    £150.38 inc VAT - £125.32 exc VAT
    24V Wiper Motor - Autopark 48mm Twin Shaft 90°

    3 Way Male Deutsch DT Series Connector Housing only (shell) Pk 100

    £205.02 inc VAT - £170.85 exc VAT
    3 Way Male Deutsch DT Series Connector is rated at 13 Amps continuous. Order Part No. 0-011-33 for 1 full kit, supplied with terminals for cables 0.5-1.0mm² and seals. Order Part No. 3-011-33 for 100 x housing only (shell). Order Part No. 3-111-33 for 100 x wedgelock only (wedge). Terminals for 1.0-2.0mm² cables also available.

    5″ TFT LCD CCTV Monitor (3 camera inputs) – 12/24V

    £188.28 inc VAT - £156.90 exc VAT
    Durite 3-channel 5" colour TFT LCD monitor with inputs for up to 3 cameras.
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 7″ 1080p AHD Mirror Monitor (2 camera inputs) – 12/24V

    £187.56 inc VAT - £156.30 exc VAT
    Durite 7” 2-channel mirror monitor is suitable for most cabins and ensures robust installation on all vans.
  • Easy to install, just clips onto existing rear view mirror (compatible with rear view mirrors 63.2mm to 82mm)
  • Supports up to 2 cameras
  • Features a parking guideline
  • Suitable for both 12/24V vehicles
  • E-Marked, R10 EMC, CE & UKCA approved
  • 7″ Mirror Monitor Number Plate Cam Kit (2 cam inputs, incl. 1 x 25cm rear number plate cam)

    £198.34 inc VAT - £165.28 exc VAT
    Durite 2-channel rear view number plate camera system features a 7" Colour mirror monitor & 1 rear view 25cm colour camera.
  • Suitable for 12V/24V applications.
  • High resolution monitor and bracket is suitable for most cabins while the shielded cable ensures robust installation
  • Colour camera protected to IP68
  • CMOS image sensor
  • Comes with remote control
  • 1 additional camera can be used with this kit
  • 7″ Monitor Number Plate Cam Kit (2 cam inputs, incl. 1 x 25cm rear view number plate cam)

    £191.63 inc VAT - £159.69 exc VAT
    Durite 2-channel rear view number plate camera system, includes 7" Colour TFT LCD monitor & 1 rear view 25cm colour camera.
  • Suitable for 12V/24V applications
  • High resolution monitor and bracket is suitable for most cabins while the shielded cable ensures robust installation
  • Colour camera protected to IP68
  • CMOS image sensor
  • Comes with remote control
  • 1 additional camera can be used with this kit
  • 7″ Round Headlamp Unit, Dip/Main Beam – Right Hand Drive

    £186.61 inc VAT - £155.51 exc VAT
    Super powerful 14 x 5W CREE LED 7 Inch Round headlamp for right hand drive vehicles. 12/24VDC. 70W Main Beam (4900lm), 55W Dipped Beam (3850lm) and a 3W Position Lamp. IP67. Black. Aluminium housing & Polycarbonate Lens. H4 to H13 adaptor included. E Marked R7, R112. Applications: Off-road vehicles, trucks, engineering vehicles, special vehicles (Fire engine, police cars, rescue vehicles), forklifts, trains, boats & buses

    7″ Split Screen CCTV Monitor (2 camera inputs with fan bracket) – 12/24V

    £181.80 inc VAT - £151.50 exc VAT
    Durite 2-channel 7" split screen monitor with inputs for up to 2 cameras.
  • View 2 cameras on one screen
  • Sunshade & U-shape steel bracket
  • E-Marked ECE R10 approved
  • 7″ TFT LCD AHD CCTV Monitor (3 camera inputs) – 12/24V

    £170.80 inc VAT - £142.33 exc VAT
    Durite 3-channel AHD 7" colour TFT LCD monitor with inputs for up to 3 cameras.
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 7″ TFT LCD CCTV Monitor (2 camera inputs) – 12/24V

    £153.32 inc VAT - £127.77 exc VAT
    Durite 2-channel 7" colour TFT LCD monitor with inputs for up to 2 cameras.
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 7″ TFT LCD CCTV Monitor (2 camera inputs) – 12V/24V

    £150.76 inc VAT - £125.63 exc VAT
    Durite 2-channel 7" colour TFT LCD monitor with inputs for up to 2 cameras.
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 7” TFT LCD CCTV Monitor (3 camera inputs) – 12V/24V

    £153.32 inc VAT - £127.77 exc VAT
    Durite 3-channel 7" colour TFT LCD monitor with inputs for up to 3 cameras
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 8 Function LED Rear Combination Lamp – S/T/Fog/SM/DI/Ref/Rev/NPI – 24V – |Left Hand

    £142.38 inc VAT - £118.65 exc VAT
    Commercial rear lamp. 24 volt LED stop/tail/fog/side marker/direction indicator/reflex reflector/reverse/number plate illumination, pre-wired. l 515 x w 90 x h 130mm. ECE approved.

    8 Function LED Rear Combination Lamp – S/T/Fog/SM/DI/Ref/Rev/NPI – 24V – |Right Hand

    £143.01 inc VAT - £119.18 exc VAT
    Commercial rear lamp. 24 volt LED stop/tail/fog/side marker/direction indicator/reflex reflector/reverse/number plate illumination, pre-wired. l 515 x w 90 x h 130mm. ECE approved.

    9 X 10W CREE LED Work Lamp – 12/24V

    £142.35 inc VAT - £118.63 exc VAT
    6 inch 9 x 10 watt 12/24 volt CREE LED work lamp. 7050Lm. 6000K. Black powder coated die cast aluminium case, polycarbonate lens, supplied with stainless steel adjustable bracket and 400mm flying leads. Protected to IP67. EMC and CE Approved.

    9″ TFT LCD CCTV Monitor (2 camera inputs) – 12/24V

    £187.79 inc VAT - £156.49 exc VAT
    Durite 2-channel 9" TFT LCD colour monitor with inputs for up to 2 cameras.
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 960H Wireless Magnetic Camera With RX Box – 12/24V |Receiver Box Only

    £204.42 inc VAT - £170.35 exc VAT
    Durite 960H wireless magnetic camera is easily mounted onto any point of your vehicle with up to 100m transmition range.
  • Crystal clear image: 700TVL 2.8mm lens
  • 8600mAh Battery can last up to 9 hours
  • Protected to IP67/69K
  • Robust: 10G vibration
  • 8 Infrared LEDs
  • Viewing angle; 120° H, 95° V
  • E-Marked R10 EMC
  • When using the receiver it can be connected to our wired standard resolution monitors or our DVRs

    Blade Terminal – 6.30mm Blade for 0.5-2.0mm² cable 1000 pk

    £140.52 inc VAT - £117.10 exc VAT
    Blade Terminal - 6.30mm Blade for 0.5-2.0mm² cable 1000 pk

    Blind Spot Detection System Right Side Only – 10-32V

    £183.38 inc VAT - £152.82 exc VAT
    Blind spot detection system right side only, 4 Sensors (5, 6, 7, 8).
  • Protected to IP68
  • Sensor holders & suspended brackets
  • 1 x 9.2m & 4 x 2m harness
  • E Marked R10 EMC approved