Alarm Back-up 102dB(A) 12-48 volt Bx1
Back-up alarm, 12 - 24 volt, Adjusts automatically to environmental noise reducing the sound level from 112 to 87 dB(A). 60 pulses per minute. Polarity protected solid state epoxy-potted electronics. Steam-cleanable. Two position fixing bracket. EEC and CE approved. N.B. This alarm MUST HEAR the surrounding noise level to adjust its output. Mount alarm at rear of vehicle facing the back, without obstruction.
Alarm Back-up Heavy Duty 112dB(A) 12-24 volt Bx1
Durite heavy-duty reversing alarm is used for warning and alerting road users and people around the vehicle. Minimising any potential or unwanted accidents on the road or at the workplace when the vehicle is reversing.{{bul}Sealed in epoxy for protection against dust, moisture & vibration{/bul}{bul}Protected to IP66{/bul}{bul}H 127 x W 95 x H 77mm{/bul}{bul}EMC R10 CE approved{/bul}}
Amber Valley 12-24V Left Turn Sideminder AVSM14CL4
“WARNING, this vehicle is turning LEFT!” – UK/left-hand drive roads
The Sideminder system comes complete with a master and two slave speaker units, as well as a complete wiring harness to connect the units together. The unit is activated when the indicators are in operation. It’s quick and easy to install and designed to protect those around the vehicle. For noise sensitive areas, the Sideminder system has a night silent function which can be wired through the sidelights or a switch on the dashboard. The unit knows when the hazard lights are in operation and automatically mutes.
Blind Spot Detection System Right Side Only – 10-32V
Blind Spot Detection System With Left Turn Speaker and Low Speed Trigger Module – 12/24V
Durite intelligent ultrasonic blind spot detection system features an in-cab LED visual warning alert and left turn speaker. It is specially designed for commercial vehicles up to 12m with superfast speed detection and protected from steam-jet cleaning. Features a low speed and indicator trigger moduleVisual & audible warnings up to 1.5M with LED warning buzzer Detection within 0.2 seconds ECU protected to IP69K Sensor & connector protected to IP68 Shock & vibration resistant Environment learning mode Flush (0°), 11° & underslung mounting available E Marked ECE R10.05
Blind Spot Detection System With Left Turn Speaker – 12/24V
Durite intelligent ultrasonic blind spot detection system features an in-cab LED visual warning alert and left turn speaker. It is designed for commercial vehicles with superfast speed detection and protected from steam-jet cleaning.Visual & audible warnings up to 1.5M with LED warning buzzer Detection within 0.2 seconds ECU protected to IP69K Sensor & connector protected to IP68 Shock & vibration resistant Environment learning mode Flush (0°), 11° & underslung mounting available E Marked ECE R10.05
Blind Spot Detection System With Left Turn Speaker – 12/24V
Durite left side blind spot detection system gives you full coverage of the passenger side and comes with a visual overlay when connected to an in-cab monitor. It also warns cyclists and pedestrians when the left indicator is engaged, sounding "Caution! This vehicle is turning left."For 12/24V commercial vehicles Two stage sensitivity 0-0.9m & 0-1.8m Control maximum speed at which you want obstacles to be detected by GPS Waterproof to IP68 ECE, EMC R10 approved
Right Turn Speaker, 97dB – 12/24V
Durite right turn Speaker. speaker announcement is "This vehicle is turning right". Used for warning external hazards of a potential threat when the vehicle is manoeuvring right. Suitable for use on large, light goods and public service vehicles. Automatically activates when left turn indicator is in use. Waterproof to IP66. At 97dB it is loud enough to be heard over moving traffic. E Marked & R10 approved. H 80.30 x W 100.00 x D 73mm. E Marked EMC R10 approved
Reverse Speaker, 97dB – 12/24V
Durite reversing speaker Speaker announcement is "This vehicle is reversing" Used for warning external hazards of a potential threat when the vehicle is manoeuvring Suitable for use on large, light goods and public service vehicles. Automatically activates when reversing, night silent mode trigger waterproof to IP66. At 97dB it is loud enough to be heard over moving traffic. E Marked & R10 approved. H 80.30 x W 100.00 x D 73mm
Left Turn Speaker, 90dB – 12/24V
Durite Left Turn Speaker. Speaker announcement is "Caution, vehicle turning left". Used for warning external hazards of a potential threat when the vehicle is manoeuvring left.Suitable for use on large, light goods and public service vehicles Automatically activates when left turn indicator is in use Protected to IP68 E Marked & R10 approved Note: At 70dB it is loud enough to be heard over moving traffic.
Left Turn Speaker, 97dB – 12/24V
Durite Left Turn Speaker. Speaker announcement is "This vehicle is turning left". Used for warning external hazards of a potential threat when the vehicle is manoeuvring left. Suitable for use on large, light goods and public service vehicles. Automatically activates when left turn indicator is in use. Waterproof to IP66. At 97dB it is loud enough to be heard over moving traffic. E Marked & R10 approved. H 80.30 x W 100.00 x D 73mm.
