Showing 37–48 of 149 results

7″ Wireless TFT LCD CCTV Monitor (2 camera inputs) – 12/24V

£218.28 inc VAT - £181.90 exc VAT
Durite 2-channel 7" Wireless colour TFT LCD CCTV monitor with inputs for up to 2 cameras.
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 7” TFT LCD CCTV Monitor (3 camera inputs) – 12V/24V

    £153.32 inc VAT - £127.77 exc VAT
    Durite 3-channel 7" colour TFT LCD monitor with inputs for up to 3 cameras
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 8 Function LED Rear Combination Lamp – S/T/Fog/SM/DI/Ref/Rev/NPI – 24V – |Left Hand

    £142.38 inc VAT - £118.65 exc VAT
    Commercial rear lamp. 24 volt LED stop/tail/fog/side marker/direction indicator/reflex reflector/reverse/number plate illumination, pre-wired. l 515 x w 90 x h 130mm. ECE approved.

    8 Function LED Rear Combination Lamp – S/T/Fog/SM/DI/Ref/Rev/NPI – 24V – |Right Hand

    £143.01 inc VAT - £119.18 exc VAT
    Commercial rear lamp. 24 volt LED stop/tail/fog/side marker/direction indicator/reflex reflector/reverse/number plate illumination, pre-wired. l 515 x w 90 x h 130mm. ECE approved.

    9 X 10W CREE LED Work Lamp – 12/24V

    £142.35 inc VAT - £118.63 exc VAT
    6 inch 9 x 10 watt 12/24 volt CREE LED work lamp. 7050Lm. 6000K. Black powder coated die cast aluminium case, polycarbonate lens, supplied with stainless steel adjustable bracket and 400mm flying leads. Protected to IP67. EMC and CE Approved.

    9″ High Beam LED Driving Lamp With DT Connector – 12/24V

    £135.41 inc VAT - £112.84 exc VAT
    Durite 9" high beam LED work lamp is supplied with a 3 pin DT connector.
  • 12 x CREE LED: High beam: 60W Max
  • 2 x LED: Position beam: 0.5W Max
  • 6000 Lumens
  • 6000-6500K LEDs
  • 60W power
  • Protected to IP67
  • 50,000 hours life time
  • Aluminium housing with polycarbonate lens
  • E-Marked R112, R7 & R10 approved
  • 9″ TFT LCD CCTV Monitor (2 camera inputs) – 12/24V

    £187.79 inc VAT - £156.49 exc VAT
    Durite 2-channel 9" TFT LCD colour monitor with inputs for up to 2 cameras.
  • Suitable for 12/24V applications
  • E Marked ECE R10 approved
  • 960H Wireless Magnetic Camera With RX Box – 12/24V |Receiver Box Only

    £204.42 inc VAT - £170.35 exc VAT
    Durite 960H wireless magnetic camera is easily mounted onto any point of your vehicle with up to 100m transmition range.
  • Crystal clear image: 700TVL 2.8mm lens
  • 8600mAh Battery can last up to 9 hours
  • Protected to IP67/69K
  • Robust: 10G vibration
  • 8 Infrared LEDs
  • Viewing angle; 120° H, 95° V
  • E-Marked R10 EMC
  • When using the receiver it can be connected to our wired standard resolution monitors or our DVRs

    Automatic Battery Charger – 12V 20A

    £128.04 inc VAT - £106.70 exc VAT
    12 volt 20 amp, input 100 - 240 vac 50 - 60Hz. , including sealed for life, gel and maintenance free. Features: micro chip controlled three stage charging, allowing the charger to be left permanently connected without harming the battery. On/off switch, detachable wall-mount brackets, supplied with crocodile clips and leads.

    Automatic Battery Charger – 24V 10A

    £128.04 inc VAT - £106.70 exc VAT
    24 volt 10 amp, input 100 - 240 vac 50 - 60Hz. , including sealed for life, gel and maintenance free. Features: micro chip controlled three stage charging, allowing the charger to be left permanently connected without harming the battery. On/off switch, detachable wall-mount brackets, supplied with crocodile clips and leads.

    Blade Terminal – 6.30mm Blade for 0.5-2.0mm² cable 1000 pk

    £140.52 inc VAT - £117.10 exc VAT
    Blade Terminal - 6.30mm Blade for 0.5-2.0mm² cable 1000 pk

    Blind Spot Detection System Right Side Only – 10-32V

    £183.38 inc VAT - £152.82 exc VAT
    Blind spot detection system right side only, 4 Sensors (5, 6, 7, 8).
  • Protected to IP68
  • Sensor holders & suspended brackets
  • 1 x 9.2m & 4 x 2m harness
  • E Marked R10 EMC approved