6 way Male Deutsch DT Series Connector wedgelock only (wedge) Pk 100
6 Way Male Deutsch DT Series Connector is rated at 13 Amps continuous. Order Part No. 0-011-36 for 1 full kit, supplied with terminals for cables 0.5-1.0mm² and seals. Order Part No. 3-011-36 for 100 x housing only (shell). Order Part No. 3-111-36 for 100 x wedgelock only (wedge). Terminals for 1.0-2.0mm² cables also available.
6 x 3W CREE LED Rectangular Reverse Flood Beam Work Lamp – 10-30V
6 x 3W LED Square Reversing Flood Beam Work Lamp 18W – 10-30V
6 x 3W LED Work Lamp – 10-40V
6 x 3W LED Work Lamp with 300mm Flying Lead – Black, 12V/24V, IP67
6 x 3W LED Work Lamp with 450mm Flying Lead – Black, 12/24V, IP67
6.5A 9 Step Fully Automatic Digital Battery Charger Maintainer – 6/12V
Automatic battery charger/maintainer for all lead acid batteries including NORM, AGM, STD, GEL & Li-phosphate (Lifepo4). 6/12V 6.5A output. Features 9 stage charging and microprocessor control allowing the unit to be left permanently connected without harming the battery. Supplied with crocodile clips. Waterproof to IP65. CE approved.
60W LED Driving Work Lamp Bar With Position Lamp – 12/24V
61W Cube LED Driving Lamp With Wide Angle Flood Beam – 12/24V
64GB micro SDXC Class 10, UHS-I, speeds up to 80MB/s read, 10MB/s write with full size adapter
64GB micro SDXC Class 10, UHS-I, speeds up to 80MB/s read, 10MB/s write with full size adapter Disclaimer:Check device for compatibility and size ratings Maximum useable capacity will be less than displayed on the product due to format and system usage SD cards have a finite life but they should outlast the device SD cards should be inserted and removed correctly, check device instructions for proper technique, if not the data could be corrupted Read and write speeds may vary between devices and configurations
65W Dual Function LED Driving Lamp With DRL & DT Connector – 12/24V
This high-quality super bright R10 dual function LED driving lamp features a Driving High Beam 10 x LEDs (65W) and Daytime Running Light 7 X LEDs (0.3W), giving you extra bright light on the road to see further so you can react sooner.9" Driving high beam & DRL with DT connector 6400Lm 10 X LEDs Driving high beam (65W); 7 X LEDs DRL (0.3W) Black aluminium housing, PC lens with stainless steel SS304 bracket Protected to IP66 E-Marked R10 EMC, R112 & R87 approved (L) 244 x (W) 120 x (H) 163mm }
7″ 1080p AHD Mirror Monitor (2 camera inputs) – 12/24V
Durite 7” 2-channel mirror monitor is suitable for most cabins and ensures robust installation on all vans.Easy to install, just clips onto existing rear view mirror (compatible with rear view mirrors 63.2mm to 82mm) Supports up to 2 cameras Features a parking guideline Suitable for both 12/24V vehicles E-Marked, R10 EMC, CE & UKCA approved
7″ Camera System (2 camera inputs, incl. 1 x rear & side camera) |Mirror image
Minimise blind spots whilst manoeuvring with our 2 camera entry level reversing kit. Mirror image. Perfect for both 12V & 24V applications; vans, rigid vehicles and articulated lorries Clear display with high resolution TFT LCD monitor Mirror image infra-red cameras for day & night vision Kit includes 1 x 7" monitor (0-776-28) 1 x Rear camera (0-776-29) 1 x Side camera (0-776-24) 1 x 20m cable (0-775-19) 1 x 5m cables (0-775-25)
7″ Mirror Monitor Number Plate Cam Kit (2 cam inputs, incl. 1 x 25cm rear number plate cam)
Durite 2-channel rear view number plate camera system features a 7" Colour mirror monitor & 1 rear view 25cm colour camera.Suitable for 12V/24V applications. High resolution monitor and bracket is suitable for most cabins while the shielded cable ensures robust installation Colour camera protected to IP68 CMOS image sensor Comes with remote control 1 additional camera can be used with this kit