White LED Front Marker Lamp With Reflex Reflector And Flying Leads – 12/24V
White PIR Timer Switch – 12/24V, 5A
Durite's easy to install slim PIR. Built in PIR sensor/switch, 35 second timer, extends battery life. Low energy consumption. Low Profile Design - only 22mm. E-type Approved ECE R10 12/24 volt. 5.0Amp. Waterproof to IP67. 5 Meter Detection Distance. 35 second timer - Once the sensor has been triggered, this timer unit will automatically switch the connected lamps on for a period of 35 seconds before automatically switching off. If continuous movement is detected then the lights in the vehicle will remain on. The maximum current draw that is permitted via the relay is 5.0 Amps Max. Low profile design - These surface mounted units are only 22mm in depth therefore keeping obstruction to the minimum.
White/Red LED Map Reading Lamp – 24V
Wireless Switch Panel With Bluetooth Remote – 12/24V
Durite Wireless Bluetooth Control Box for all Durite Warning Lights, Driving Lights and Work Lights with a max of 20A. Compatible with all Durite lights up to 20A Input: 10-30V 20A Max; 600W Max Output: 10-30V 20A Max / 10A other ports 250W Max per port Control Solution: Wire + Remote Control (50M Transmission Distance) RJ Connector Overload Protection 50M Control Transmission Distance Driving Light: ON/OFF and HIGH/LOW Beam Warning Light: ON/OFF and Mode Control Protected to IP67 E-Marked R10 EMC, RoHS, CE & UKCA }
Y piece splitter cable – 20cm
Yellow Pre-Insulated Blade Terminals – 6.30mm 50 pk
Yellow Pre-Insulated Bullet Terminals – 5.00mm 50 pk
Yellow Pre-Insulated Pin Terminals – 2.90mm 50 pk
