Victron Energy Orion-Tr Smart 12/12 30A (360W) Non-Isolated DC-DC Charger – ORI121236140
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Victron Energy RJ45 UTP Cable 3m – ASS030064980
Victron Energy RJ45 UTP Cable 5m – ASS030065000
Victron Energy Smart Battery Protect 12/24V 65A – BPR065022000
Victron Energy SmartShunt 500A/50mV – SHU050150050
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Victron Energy SmartSolar MPPT 100V 30A – SCC110030210
Victron Energy SmartSolar MPPT 75V 15A – SCC075015060R
White 138 LED Roof Lamp with Switch – 10-30V
White LED Front Marker Lamp With Reflex Reflector And Flying Leads – 12/24V
White PIR Timer Switch – 12/24V, 5A
Durite's easy to install slim PIR. Built in PIR sensor/switch, 35 second timer, extends battery life. Low energy consumption. Low Profile Design - only 22mm. E-type Approved ECE R10 12/24 volt. 5.0Amp. Waterproof to IP67. 5 Meter Detection Distance. 35 second timer - Once the sensor has been triggered, this timer unit will automatically switch the connected lamps on for a period of 35 seconds before automatically switching off. If continuous movement is detected then the lights in the vehicle will remain on. The maximum current draw that is permitted via the relay is 5.0 Amps Max. Low profile design - These surface mounted units are only 22mm in depth therefore keeping obstruction to the minimum.