Harnessflex SC-M27-90 Solenoid Elbow Connector Interface
Harnessflex CI17-FCI10 Interface
FCI Automotive Apex Interface
Single junction straight interfaces providing high integrity connections between FCI Apex connectors or Junior timer connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of slit and unslit conduit, maintaining maximum conduit bore.
Harnessflex CI16-FCI14 Interface
FCI Automotive Apex Interface
Single junction straight interfaces providing high integrity connections between FCI Apex connectors or Junior timer connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of slit and unslit conduit, maintaining maximum conduit bore.
Harnessflex CGS-M32 Cable Gland
Harnessflex AB32-PG29-90 90° Elbow Conduit Fitting
Harnessflex NEPA16-20 ADAPTOR
Harnessflex Fast-Fit Removal Tool – HTS16/RT
Harnessflex Fast-Fit Removal Tool for simple and safe removal of Fast-Fit Type A and Type C90 waterproof conduit fittings.
These hinged tools close around the conduit and the tabs slide in behind the retention clips of the fittings, spreading them outwards and releasing the conduit.
These make releasing the conduit extremely easy; a job which otherwise requires 2 pairs of hands.
-
Safe removal of Harnessflex® Fast-Fit fittings
-
Made from durable Polyamide (Nylon) 6 material
-
Helps to maintain a high level of system integrity
-
Simple to Use
-
Time Saving vs conventional methods
Harnessflex TPB28 T Piece
Harnessflex TP28 T Piece
Harnessflex AB50-M50 Straight Conduit Fitting
Harnessflex AB50-M50-90 90° Elbow Conduit Fitting
Harnessflex AB40-M40 40mm M40 Straight Conduit Fitting
Harnessflex AB50-PG48 Straight Conduit Fitting
Harnessflex MPS202820-2020 Manifold
Harnessflex Fast-Fit Type A Straight Fitting M20 FOR NC20 IP68/69 – HTS20/M20/A
The Harnessflex Fast-Fit Type A waterproof conduit fittings is a unique and innovative solution for providing maximum cable protection with effortless installation when interfacing unsplit conduit with a bulkhead or other flat surface. Simply push and rotate the conduit firmly into the fitting and connect to a bulkhead via the male thread and nut.
Compatible with all Harnessflex NC Unsplit Conduits.
-
One piece design with integrated conduit and thread sealing
-
Provides continuation of cable protection between conduit and cable entry points
-
High level of mechanical protection and highest degree of ingress protection against solids and liquids
-
External male thread for insertion into metric threaded entries or knockout holes
-
Conduit and thread size indicators moulded-in for reference
Harnessflex Fast-Fit Type A Straight Fitting M20 FOR NC16 IP68/69 – HTS16/M20/A
The Harnessflex Fast-Fit Type A waterproof conduit fittings is a unique and innovative solution for providing maximum cable protection with effortless installation when interfacing unsplit conduit with a bulkhead or other flat surface. Simply push and rotate the conduit firmly into the fitting and connect to a bulkhead via the male thread and nut.
Compatible with all Harnessflex NC Unsplit Conduits.
-
One piece design with integrated conduit and thread sealing
-
Provides continuation of cable protection between conduit and cable entry points
-
High level of mechanical protection and highest degree of ingress protection against solids and liquids
-
External male thread for insertion into metric threaded entries or knockout holes
-
Conduit and thread size indicators moulded-in for reference
Harnessflex CN36 Cap Nut
Harnessflex CIH16-FCI14 High Temp Interface
High temperature external hinged connector interfaces for FCI Automotive Apex
A range of straight fittings offering a compact and high integrity, high temperature connection protection between FCI Apex automotive connectors or junior timer connectors and Harnessflex conduit systems in elevated temperature areas. These interfaces provide complete cable protection right up to the connector.
Harnessflex CI28-BC40 Interface
External Hinged Connector Interface
Single junction, straight interfaces providing high integrity connections between various Bosch Compact connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of Harnessflex slit and unslit conduit, maintaining maximum conduit bore.
Harnessflex EVO CI16-HVA280-3 TE Amp+HVA280 (3P) Interface NC16 – Orange
Harnessflex CIH12-AT8PL Interface
External Hinged Connector Interface
A range of 90° elbow interfaces offering a compact and high integrity connection between Ampseal 16 automotive connectors and Harnessflex conduit systems. These interfaces provide complete cable protection right up to the connector. They also provide strain relief and protection from high pressure washing, helping to maintain the sealing integrity of the connector. In addition, 90° elbow versions allow the conduit to swivel 360° around the connector housing.
Harnessflex TPB20 T Piece
Harnessflex TP20 T Piece
Harnessflex MPS122812-2020 Manifold
Harnessflex CI12-AT12PL Interface
External Hinged Connector Interface
A range of straight interfaces offering a compact and high integrity connection between Ampseal 16 automotive connectors and Harnessflex conduit systems. These interfaces provide complete cable protection right up to the connector. They also provide strain relief and protection from high pressure washing, helping to maintain the sealing integrity of the connector.
Harnessflex MPS252825-2020 Manifold
Harnessflex MPS251225-2020 Manifold
Harnessflex CI122812-DRC50 Interface
Harnessflex CI08-90-GT153 Interface
External Hinged Connector Interface
90° elbow interfaces providing high integrity connections between various Delphi series connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of Harnessflex slit and unslit conduit, maintaining maximum conduit bore. In addition, 90° elbow versions allow the conduit to swivel 360° around the connector housing.
Harnessflex CI16-DT12 Interface
External Hinged Connector Interface
Straight interfaces providing high integrity connections between Deutsch DT connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of Harnessflex slit and unslit conduit, maintaining maximum conduit bore. Also compatible with Amphenol and Molex connector versions.
Harnessflex Fast-Fit Removal Tool – HTS40/RT
Harnessflex Fast-Fit Removal Tool for simple and safe removal of Fast-Fit Type A and Type C90 waterproof conduit fittings.
These hinged tools close around the conduit and the tabs slide in behind the retention clips of the fittings, spreading them outwards and releasing the conduit.
These make releasing the conduit extremely easy; a job which otherwise requires 2 pairs of hands.
-
Safe removal of Harnessflex® Fast-Fit fittings
-
Made from durable Polyamide (Nylon) 6 material
-
Helps to maintain a high level of system integrity
-
Simple to Use
-
Time Saving vs conventional methods
Harnessflex Fast-Fit Removal Tool – HTS12/RT
Harnessflex Fast-Fit Removal Tool for simple and safe removal of Fast-Fit Type A and Type C90 waterproof conduit fittings.
These hinged tools close around the conduit and the tabs slide in behind the retention clips of the fittings, spreading them outwards and releasing the conduit.
These make releasing the conduit extremely easy; a job which otherwise requires 2 pairs of hands.
-
Safe removal of Harnessflex® Fast-Fit fittings
-
Made from durable Polyamide (Nylon) 6 material
-
Helps to maintain a high level of system integrity
-
Simple to Use
-
Time Saving vs conventional methods
Harnessflex Fast-Fit Type A Straight Fitting M16 FOR NC16 IP68/69 – HTS16/M16/A
The Harnessflex Fast-Fit Type A waterproof conduit fittings is a unique and innovative solution for providing maximum cable protection with effortless installation when interfacing unsplit conduit with a bulkhead or other flat surface. Simply push and rotate the conduit firmly into the fitting and connect to a bulkhead via the male thread and nut.
Compatible with all Harnessflex NC Unsplit Conduits.
-
One piece design with integrated conduit and thread sealing
-
Provides continuation of cable protection between conduit and cable entry points
-
High level of mechanical protection and highest degree of ingress protection against solids and liquids
-
External male thread for insertion into metric threaded entries or knockout holes
-
Conduit and thread size indicators moulded-in for reference
Harnessflex Fast-Fit Type A Straight Fitting M16 FOR NC12 IP68/69 – HTS12/M16/A
The Harnessflex Fast-Fit Type A waterproof conduit fittings is a unique and innovative solution for providing maximum cable protection with effortless installation when interfacing unsplit conduit with a bulkhead or other flat surface. Simply push and rotate the conduit firmly into the fitting and connect to a bulkhead via the male thread and nut.
Compatible with all Harnessflex NC Unsplit Conduits.
-
One piece design with integrated conduit and thread sealing
-
Provides continuation of cable protection between conduit and cable entry points
-
High level of mechanical protection and highest degree of ingress protection against solids and liquids
-
External male thread for insertion into metric threaded entries or knockout holes
-
Conduit and thread size indicators moulded-in for reference
Harnessflex CI12-90-AT4PL Interface
External Hinged Connector Interface
A range of 90° elbow interfaces offering a compact and high integrity connection between Ampseal 16 automotive connectors and Harnessflex conduit systems. These interfaces provide complete cable protection right up to the connector. They also provide strain relief and protection from high pressure washing, helping to maintain the sealing integrity of the connector.
