Harnessflex CPS422020 Hinged Shroud
External Hinged Protective shroud
One-piece cover providing protection for in-line connectors, fuse links, circuit breakers and splicing areas. The CPS shrouds can be used as a harness datum, due to the integrated cable tie/fir tree facility. The strong construction allows for the protection of delicate connections, or as an alternative when an interface/backshell isn’t available. These fittings are designed to snap together over all types of slit and unslit conduit, maintaining maximum conduit bore.
Durite AMP Superseal 1.5mm – 2 Pin Male
AMP SuperSeal connector housings were developed to satisfy the increasing demands for safe and reliable electrical connections. The connectors can be connected to existing components and used with the equipment presently in use in the automotive and marine industry (sensors, oil pressure sensors, water temperature monitoring circuits, etc.) Suitable for cable sizes 0.5mm2 to 1.5mm2.
Harnessflex RSB25-20 Reducing Bush
Harnessflex YPS201616 Y Piece
Harnessflex RSB20-12 Reducing Bush
Harnessflex TPS252525 T Piece
Harnessflex EK03 Conduit End Cap
Harnessflex CI08-DT3 Interface
External Hinged Connector Interface
Straight interfaces providing high integrity connections between Deutsch DT connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of Harnessflex slit and unslit conduit, maintaining maximum conduit bore. Also compatible with Amphenol and Molex connector versions.
Harnessflex TPS251625 T Piece
Harnessflex TP12 T Piece
Harnessflex HCB12 Conduit Clip
Harnessflex ESN25 Rubber End Sleeve
Harnessflex EK05 Conduit End Cap
Harnessflex AB12-M20 12mm M20 Straight Conduit Fitting
Harnessflex AB12-M16-90 12mm M16 90° Elbow
Harnessflex YPS161010 Y Piece
Harnessflex CI08-AM2 Interface
External Hinged Connector Interface
Single junction straight interfaces providing high integrity connections between AMP Superseal or Junior timer connectors and Harnessflex conduit systems. These fittings are designed to snap together over all types of slit and unslit conduit, maintaining maximum conduit bore. In addition, 90° elbow versions allow the conduit to swivel 360° around the connector housing.
Harnessflex NC16 16mm NC Flexible Conduit – 50m
NC General purpose conduit, Polyamide 6
NC Standard weight conduit is extensively used in harnesses on HGV, off road vehicles and marine applications where a superior protection against impact and mechanical shock is preferred. The conduit is used for both chassis and engine applications and can be used in a wide range of temperatures. Polyamide 6 is highly resistant to all hydrocarbon based oils and fluids and many types of solvents.
Harnessflex TPS121012 T Piece
Harnessflex CN09-08 Cap Nut
Harnessflex LNP-M25 Lock Nut
Harnessflex CI08-AM3 Interface
External Hinged Connector Interface
Single junction straight interfaces providing high integrity connections between AMP Superseal or Junior timer connectors and Harnessflex conduit systems. These fittings are designed to snap together over all types of slit and unslit conduit, maintaining maximum conduit bore. In addition, 90° elbow versions allow the conduit to swivel 360° around the connector housing.
Harnessflex AB16-M20 16mm M20 Straight Conduit Fitting
Harnessflex CI16-DT12 Interface
External Hinged Connector Interface
Straight interfaces providing high integrity connections between Deutsch DT connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of Harnessflex slit and unslit conduit, maintaining maximum conduit bore. Also compatible with Amphenol and Molex connector versions.
Harnessflex TPS252025 T Piece
Harnessflex TPS200820 T Piece
Harnessflex RSB28-20 Reducing Bush
Harnessflex CI12-DT4 Interface
External Hinged Connector Interface
Straight interfaces providing high integrity connections between Deutsch DT connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of Harnessflex slit and unslit conduit, maintaining maximum conduit bore. Also compatible with Amphenol and Molex connector versions.
Harnessflex CI12-AT6PL Interface
External Hinged Connector Interface
A range of straight interfaces offering a compact and high integrity connection between Ampseal 16 automotive connectors and Harnessflex conduit systems. These interfaces provide complete cable protection right up to the connector. They also provide strain relief and protection from high pressure washing, helping to maintain the sealing integrity of the connector.
LED Autolamps Multifunction Rear Lamp With Dynamic Indicator – RHS
The arrival of the 284 Series Multifunction Rear Lamps has been eagerly awaited for good reason. The 284 Series combine all the essential rear light functions in one neat and stylish package. Masterfully designed with next-generation dynamic functionality and powerful yet efficient LED technology, the 284 Series lamps quite simply have it all to offer.
Combining so many functions into a single, modestly-sized unit is no small feat. The 284 Series offers Stop/Tail, Indicator, Fog, Reverse and Reflector functions, each fully ECE approved to ensure full road safety compliance.
Harnessflex CI08-DT4 Interface
External Hinged Connector Interface
Straight interfaces providing high integrity connections between Deutsch DT connectors and Harnessflex conduit systems. These interfaces are designed to snap together over all types of Harnessflex slit and unslit conduit, maintaining maximum conduit bore. Also compatible with Amphenol and Molex connector versions.
